Fang Chen has started to learn the process of adding the core to the weapon but he was unsuccessful on the 1st try so now he only had one try remaining and then he will need to close the workshop and go to sleep.
So once again he started from the beginning and he continued the process till he purified the ore with the hamr now that the ore is purified it was ti for the ore to reheat and once again to purify using the beast core.
1st ti the beast core has burst with the ore and Fang Chen knew that the reason behind that was because he didn't had enough control of spiritual energy.
So this ti he increased his focus by another fold and activated Yin and Yang divine eyes so that he will be able to see the flow of the spiritual energy and started to control the spiritual energy from the beast core and start started to temper the ore with it.
The process was very exhausting because as his own spiritual energy touched the spiritual energy of the beasts core it was corrupted aning he he was using up his own spiritual energy as he was tempering the ore.
So aside from gaining control of the spiritual energy he would need to control the amount of spiritual energy he uses otherwise before he could temper the whole ore he would be exhausted.
So he started very slowly and keeping in his mind that he can be exhausted any ti so he imdiately prepared his breathing technique to be used as he was ending near of his spiritual energy.
This ti the beast core and the ore didn't burst because he was very ticulous and was working very slowly but still the process was going on smoothly and smoothly and the ore was tempering perfectly.
But he couldn't continue the process for longer before he could even exhaust himself the beast core burst once again and the ore and the beast core was destroyed.
There was the sa reason behind it and that was that he was not able to control the spiritual energy from the beast core so Fang Chen understood one thing that he should gain higher control of the spiritual energy then he can try once again.
But now that he has tried twice there was no need for him to stay in the workshop it was ti to go to sleep so he imdiately left the workshop and went to sleep.
Next morning he focused on his daily routine and the shop but aside from that during the whole day he tried to practice to hold many different things of different weight using his spiritual energy.
He was doing this because the system told him that he will be able to gain a high level control if he continuously practice with his own spiritual energy
So once again at midnight he went to the workshop and started the practicing.
He heated the ore and purified it with hamring. Everything was done perfectly till the last process now that the ore is purified it was ti to repeat it and once again purify it using the beast core.
Fang Chen was unsuccessful this ti because he was able to control the spiritual energy but towards the end of the process it got lot harder for him to hold on and at the end the ore and the beasts core was destroyed.
But now he believes that he will be able to complete the process. So imdiately after recovering to top condition he once again started and after purifying the ore with the hamr imdiately reheated it and started to temper it using the beast core.
This was his 4th try but he believed that he will be able to temper the ore perfectly so he was not worried at all he was only concentrating on controlling the spiritual energy.
Fang Chen expected that with moving slowly and increasing his concentration he was able to complete the process of tempering the ore with the beast core.
Dur to that the beast core and the ore had completely rged and a new type of ore was ford.
Fang Chen was shocked seeing the ore he had not expected that the reaction would be like this after the beast core and the ore combined. He didn't had any ti to waste so he imdiately added the ore into the furnace and started to reheat it.
Now after reheating it was ti for Fang Chen to shape the newly ford ore into the weapon he wishes to refine.
So after heating was done he took out the ore from the furnace and started to shape it using the hamr.
This ti the process was completely different from shaping the ordinary grade one weapon
After each hamr strike Fang Chen was able to fill was able to feel that sothing was coming out of the ore and each hamr strike was thrown towards him after he strike the ore every ti.
Seeing this Fang Chen understood what the system was talking about. Even Though the weapon hes going to be will be the pseudo spirit weapon it still had the characteristics of the spirit weapon .
After the beast core and the ore was combined the newly ford ore was showing reaction whenever he strikes it with a hamr to shape it into a particular weapon.
And Fang Chen was not able to control this and due to that the shape of the ore was deford and the ore was cooled down so it couldn't be shaped into a proper weapon so once again he has to start from the beginning but this ti he believed that his concentration was not enough during the shaping of the weapon that's why he was unsuccessful.
He had been unsuccessful in his all 4 tries but in his tries he had increased his understanding of the process and continued to move forward.
Once again he stopped working in the workshop and went to sleep. He once again woke up early in the morning and followed the similar routine while practicing the spiritual energy control.
After midnight once again he was back in the workshop and started the practicing.
He was able to purify the ore and combine it with the beast core and once again a new ore was ford now he has to increase his concentration and start shaping the newly ford ore into the weapon.
After heating the newly ford ore he started to hamr into the proper shape of the weapon. After so few minutes he was unsuccessful the reason was the sa as the last ti that he was not able to control the newly ford ore.
He not worried at all because he had gained an idea behind how to control the ore so once again he started from the beginning and after combining the beast core and the ore and reheating the newly ford ore he once again started the the process of shaping it into the weapon.
This ti he had used his own spiritual energy to completely surround the newly ford ore and after that his spiritual energy surrounded the ore he started to pressure the ore with spiritual energy and started to hamr it at the sa ti by pressuring it he was able to control the shape if it will take after hamring.
So after hamring it for half an hour finally it had completed to shape the ore. Even though it was not perfect it was a lot better than the previous attempts but still seeing this he believed that he was unsuccessful because now the Last process was remaining and that was quenching and seeing the sword he has refined he believes that it will not survive the quenching process.
Instead of quenching the weapon he kept it aside and started to recover his spiritual energy even though he had already used up his ti to refine the weapon he believe that he can stay for one more attempt and this ti he will be successful.
Process till the newly ore was ford was quite easy for him and he has not made any single mistake now it was ti to reheat the newly ford ore and once again start shaping it.
After heating he started to pressure the ore into the shape he wishes to be ford and started to hamr it according to it.
This Ti he was using each hamr strikes very ticulously andbThe newly ford ore was spreading in equal direction aning the balance was also correct this ti.
after hamring for half hour a sword was finally ford and from looking at it even though it was still far from the perfect sword he wished to refine but it was more than enough from the last sword he has refined.
And this ti he didn't know if it will survive the quenching process or not so he put it in the furnace to reheat it to the top temperature and prepare the sword to dump it in the spiritual pond for the quenching process.
Reviews
All reviews (0)