Reincarnated as the Chapter 547: Another Set Of Gifts (3)

Chapter 547: Another Set Of Gifts (3)

---

Thanks Kaiju_TSlayr for the Magic Castle~!

That adds so more bonus Chapters to what I still owe you all lmao~!

---

Shelur and Renna retreated towards one of the crates behind , the two watching as I pulled one of the hamrs from my inventory alongside so tongs and a pair of thick leather gloves, which I put on instantly to protect myself from the flas.

Then a leather apron to match fell atop my chest and protected

from anything that might damage , whilst still leaving a majority of my skin exposed to the world, which let the two ogle

freely as I began to work.

To start, I placed the reddish silver tal into the furnace - an ingot of Ardere Steel - and began to heat that up as I browsed through my inventory and found so simpler, yet still excellent quality supporting materials for Shelur's weapon, like Mana Wood and so Geri leather.

The Orc wanted a long, heavy, single edged axe to complint her sword that she already had, so I had to ensure that the materials were bound together perfectly as well, which made

pull out so more Mana Steel to utilize for pins and braces on the axehead.

I also wanted to make this a bit stylistically unique as well, sothing that would look amazing and powerful to match the Orc's natural stature, while also keeping it to a minimum so that it wasn't flashy; I wanted it unique but subdued, which... well, I an, considering how Shelur acts and how big she is in multiple areas, that might just be impossible anyways.

Whilst the tal began to heat up in the furnace, I got to work cutting the Mana Wood down into the haft of the axe, making it a bit wider than normal since it would be wielded by soone with larger hands, and also leaving a tapered tip that I would need to drill through to secure the axehead to the haft.

There were probably easier ways to get this done, but it was what seed easiest to , so I got to work drilling out the holes using a cylindrical file and simple 'drill', which was just a flattened, sharpened tip of tal that had a wide wooden handle for

to rotate back and forth, using it to cut into the wood and create a straight hole.

By then the tal was thoroughly heated, so I used the tongs and pulled it from the furnace before placing it onto the now clean anvil, the red tal glowing with an intense heat that felt like it might begin softening the anvil enough to get damaged.

Grabbing the heavier hamr, I began to flatten the ingot down into an inch thick sheet of tal, which was then reheated after I got it to be rather uniform; as I did so, I also got a second ingot ready to go inside the System's interface, just in case I ssed up doing it myself.

While I waited for it to get red hot again, I got back to working on the haft, smoothing the wood and shaping it so more, losing myself to this physical labor once again; it was soothing in its own way, and despite having a System that could do this for

in almost no ti at all, I rather enjoyed using my hands for sothing besides lovemaking.

Speaking of, despite

being lost in my own little world that only had the anvil, crafting table and the furnace, I still got to see peeks of the 'outside' whenever I glanced at the crates that the other two rested on, and what I saw didn't really surprise .

Renna was leaning into Shelur's embrace, her hands dancing up and down the Orc's cock as they both watched

with obvious lust; sotis Shelur would lean down and start suckling on Renna's tit, and sotis Renna would lean down and start sucking Shelur's cock.

I really wanted to join them, but as I began to do the shaping of the axehead, I lost myself once more to the forging process as I got to exert my creativity onto sothing that would be soone's gift, and it consud all of my attention as I got into the details.

The red tal was gradually lengthened to form the bulk of the head, and I lengthened the beard of the axe downwards, giving Shelur a larger blade to work with and deal damage with, and after so contemplation I decided to lean into the fiery elents of the tal.

Curving the blade inwards in the middle of the beard, but curving it outwards at the top - so that it vaguely resembled an 's', albeit not as curved - I got it to look similar to fire in a vague sense, but with so detailing on the blade and so etching, I would definitely get that desired look.

All I needed to do was focus on the axe's socket, which needed to have holes that matched the ones on the wooden haft - sothing that wouldn't be easy to do normally, but with a System aiding , I cheated in just this single area, marking out the areas I needed to drill holes into and using heat to help puncture the tal.

When it was all done, I had a beautiful crimson axehead and a nice, dark brown wooden handle that was going to get a cross hatch leather wrap to help Shelur grip the axe better, as well as a leather sheath to protect the blade.

That would be done later, but for now I had the bulk of the work done, and just needed to begin assembling the axe, which didn't take too long; the Mana Steel pins secured the axehead to the haft, and I ensured everything remained together with a bit of System support just as a precaution, binding the two pieces together to create a single, unique item.

[Ardere Steel War Axe : Attack Value

30, Fire Mana Damage

25%, Fire Mana Gathering Efficiency

15%, Increases {Wielders} strength by 5%]

[Would you like to na this {Weapon}? Y/N]