At three in the morning, the official website resud.
The notice issued by the hacker was naturally deleted, and the announcent was re-released, saying that the official website was maliciously falsified.
After the website was opened, so of the pictured night owls were discussing the matter.
The Monster Heavy Factory official website was hacked, and they unanimously believed.
They are purely sensory and confident in Big Beast Heavy Industries.
This also makes them extrely rare, have spoken one after another to speculate on where the hackers are going to make their attack.
So people speculate that it is a foreign hacker group.
Because of the rise of the behemoth heavy industry, the biggest threat is not the dostic enterprises, but the established companies that occupy the world’s leading industrial manufacturing share.
So people have speculated that so hackers saw that the profits earned by the behemoths were too terrible, so they attacked the official website and wanted to extort money.
There are many similar examples.
Almost all of the erging online platforms have experienced the hacking of hackers, and even ordinary people have not escaped.
In the first half of the year, due to the IOS vulnerability problem, so users turned on the mobile phone and found that the mobile phone has been banned from use.
The hacker’s contact information is more arrogant and appears directly in the prompt.
The user’s mobile phone will be restored after paying a certain amount of money.
The truth is still a mystery.
The next day, Ye Qing couldn’t sleep for a night, and with all the staff of the network departnt, he was busy setting up the standby server and completely formatting all the computers in the company.
The host responsible for the maintenance of the official website was replaced, independent IP, independent networking, and employees 24 hours a day.
The operation room is also undergoing renovation, directly physical isolation, without any network.
Only ghosts can invade!
The electronic network is precisely the shortboard of Ye Qing.
Fortunately, the company only has an official website to maintain.
When a hacker invaded a company, only two hosts in the company were running.
One is the host responsible for the maintenance of the official website, and the other is the control room of the operation room.
There is no important information on both hosts.
Did not cause too much damage to the company.
The factory at Longxitan Beach also needs to renovate the network completely.
The network here is basically undefended, and Ye Qing takes it all day to watch the TV page.
Back to Longxitan, Ye Qing’s first thing was to pull the router directly.
All computers involved in industrial production are physically isolated.
In particular, the large-capacity mainfra used to store a large number of drawings, Ye Qing network card has been removed.
Since the use of computers, they should be strictly separated.
Entertainnt should be returned to entertainnt, and office work should be returned to office.
After finishing all this, it is already in the afternoon, and there has been no news of hackers continuing to invade.
If love doesn’t co, Ye Qing doesn’t run an online ga company.
Where will he focus completely on the whole network?
Industrial manufacturing is the focus.
In the underground base, the microwave sintering furnace has been manufactured by the Master Craftsman.
tal experts are standing in front of the workbench and formulating super-hard alloys according to the formula.
Tungsten, cobalt, bismuth, titanium, nickel, five tal components, proportioned.
Ye Qing first asked the tal experts first to dispense 50 kilograms of tal powder, which was then sent to a forging press and forged into a 2X2 square sintered part.
The sintered part was sent to the microwave sintering furnace, and the tal expert said nothing, went to the sintering furnace that can accommodate a car and set the temperature at 1455 degrees.
This temperature is exactly the lting point of nickel among the five tals.
Sintered super hard alloys have extrely complex steps, and the first step is the difficult liquid phase sintering in powder tallurgy.
Compared with traditional slting technology, powder tallurgy has a big drawback - the material pore size is too large.
Because the tal can’t be lted like in a steel furnace during the sintering process.
It is a tal powder cast molding that once lted and deford, it becos scrap.
Liquid phase sintering can solve this technical defect, depending on the principle of the lting point of the tal.
The tal powder is doped with a tal having a lower lting point so that the low-lting-point tal uniformly distributed inside the sintered part starts to lt and penetrates into the void of the sintered part.
After the temperature was set, Ye Qing heard a slamming sound and the whole sintering furnace began to tremble slightly.
Ye Qing retired to eight feet away.
It is said that microwave ovens have radiation. In front of this, no matter the volu or power, it is 100 tis stronger than microwave ovens.
God knows whether there is radiation.
In the furnace, the internal structure of the super-hard alloy began to change.
The silver-white nickel powder with 8% content slowly turns into a liquid state.
After five minutes, the temperature was increased by forty degrees.
This is the lting point of tallic cobalt.
When the tallic cobalt is also converted into a liquid state, the tal expert opens the microwave sintering furnace and takes out the semi-finished product which has beco dark.
Without any tools, he took out his hands with black armor.
Insulation of armor can isolate heat, and tal experts put semi-finished cented carbide into a carburizing dium heated to 900 degrees for carburizing.
Carburizing allows the tal to achieve the higher hardness and wear resistance.
There are several steps into the furnace, quenching, and low-temperature tempering.
When a piece of black is like a Hui ink, and the surface is rubbed with a fine grainy tal plate, it appears in the face of Ye Qing, the ti has passed for an hour and a half.
Ye Qing gently tapped the black tal with a hamr, and the sound that was passed back to the ground was "Thump ~," and the shocked Ye Qing wrist was numb.
Ye Qing couldn’t wait to let the giant hard work move the super-hard alloy to the outside of the factory, and he got into the cockpit of the Titan I, ready to test how hard it is.
On the robot arm of the chanical Colossus Type I, a broken hamr and a cutting gear are locked.
Ye Qing operated the breaker and launched a blow on the super-hard alloy resting on the ground.
"Pop-Pop"
The breaker touched this piece of super-hard alloy, and the blue leaf ear was followed by a thunder.
The broken conical hamrhead, every ti it touches, it sparks a dazzling spark.
The ground is also followed by clatter vibration, the broken hamr can easily break the power of the large rock of the abrasive disc, but it can’t leave traces on this super hard alloy plate.
The impact lasted more than seventy, and the rocks on the ground were shaken into fluffy powder.
However, Ye Qing jumped out of the car and looked at it.
He found that the surface of the super-hard alloy was only one dent in the size of the wine glass.
On the contrary, the hamr is also made of alloy material, and the sharp hamr tip is evenly flattened.
Switch to the cutting gear, the spark and the sluice gate are the sa as the drain.
Wait until the cutting gear is hard to get rid of all the serrations, super hard surface, and only a shallow cut.
The scene that happened in front of Ye Qing made him unable to speak with a big mouth.
The power of the chanical Colossus Type I is best understood, but it can be seen that even after an hour, it is impossible to eradicate this super-hard alloy sheet.
------------------------------
Reviews
All reviews (0)