Blacksmith: You Are Making Mjolnir For The Forging Exam? Chapter 318 The First Experiment

There were already many staff mbers waiting around the central control console. They were adjusting the instrunts and preparing to start them at the sa ti and send steam energy to all the large machines.

Bright lights shone down from above Wu Mo's head, and the large instrunts around him constantly rumbled as they operated. It was like a scene from a steam punk movie, and it made him a little excited.

Wu Mo stood in place for a mont. When he noticed the screens of the instrunts light up and saw how they normally worked, he imdiately walked toward a large instrunt not far away.

The reason he had rushed to the research facility in advance was to fuse the new tal with high-molecular polyethylene and forge it into a new alloy. It would be the main material for the Three-dinsional Maneuver Gear's exoskeleton.

The working environnt required to forge a new alloy was difficult to achieve with ordinary furnaces, so he could only use these modern instrunts to mix the two materials together.

Although Wu Mo already knew all the theoretical knowledge about forging a new alloy, he had never actually put it into practice, so he was not sure if he could successfully forge it.

Last night, he had used the backtrack function in the Divine-grade Forging Space to successfully forge three sets of raw materials for the new alloy. With three chances, Wu Mo had to succeed no matter what.

If the alloy forging failed this ti, the Three-dinsional Maneuver Gear's progress would inevitably be delayed.

However, he did not have much ti now. There were less than two months until the end of the year. He had to seize every minute and second!

At the research facility, Wu Mo did not have to line up like he did yesterday because he ca in at the opening ti.

He stood in front of the large material fusion machine and took a deep breath. He then took off his work pass and placed it on the operating table.

Soon, the material fusion machine was successfully activated, and the nearly three-ter-tall device before him started to buzz.

In the next second, the work entrance next to him opened. Wu Mo put his mind to work, and a ball of tightly stuck, white granular polyr polyethylene appeared in his hand.

He threw it into the tool's mouth, then threw in a fist-sized affinity tal and so rare auxiliary materials.

After waiting for the operation port to close, Wu Mo imdiately began to adjust the instrunt's internal fusion environnt, including the temperature, humidity, oxygen concentration, and other attributes.

After everything was settled, he pressed the red processing button without thinking.

Chi...

He heard a sound, and the instrunt in front of him suddenly emitted a large amount of white steam. The next mont, the screen on the control table lit up, and the words "processing" were displayed on it.

"Let's hope I can succeed on the first try."

Pursing his lips, Wu Mo slowly stepped back and waited for the machine to finish working.

By now, many other workers had already appeared in the research facility.

They shuttled between all kinds of instrunts. So were studying the properties of materials, while others were looking up at the screens nervously.

From ti to ti, he could see young girls in blue overalls, holding docunts and going in and out of the office area not far away.

Wu Mo waited patiently as the fusion machine finished its processing.

Out of nowhere, the youthful voice of a man interrupted him from behind.

"Little Brother, you're here to forge materials so early in the morning?"

Wu Mo had been focused on the screen, but the sudden voice startled him.

He turned around subconsciously and saw a middle-aged man in a gray coat standing behind him.

"You... How are you doing?"

Wu Mo nodded politely.

It was only his second day at the armory, so he definitely did not know the middle-aged man in front of him.

"Haha, don't be nervous. I'm not in a hurry. It's fine if you use this device a few more tis. By the way, you don't look familiar. You must be new to the armory.

The middle-aged man smiled and shrugged, then started to chat with him.

Seeing that the equipnt in front of him was about to finish processing, Wu Mo did not want to miss the ti to take the finished product out of the furnace. "Oh... I just arrived yesterday, so it's no surprise that you don't know ," he said absent-mindedly.

He turned around and stared at the entrance of the fusion machine.

The middle-aged man behind him wanted to say sothing, but just as he was about to open his mouth, a burst of steam interrupted him.

The instrunt before him emitted white steam, and the surrounding temperature imdiately rose a little.

Wu Mo's eyes lit up. He waved his hand to fan away the steam around him. Then, he imdiately put on a pair of insulated gloves and took out the materials inside.

The two balls of materials he had thrown in earlier were the size of a fist, but the tal block in front of him now was only the size of a sugar cube.

The tal block was light gray in color, and its surface was hard and rough. There were so feathers on the edge. It seed to be a failed product.

Seeing this, Wu Mo was not discouraged. Instead, he took out a small knife from his pocket.

The knife was only a dozen centiters long and had a yellow plastic shell. The body of the knife was made of fine iron, but the tip was inlaid with diamonds. It could easily cut through materials with a hardness of less than 70.

He held the light gray tal block in his left hand and the diamond knife in his right hand. Then, he frowned and cut the surface of the tal block with force.

The two objects ca into contact, and he heard a piercing sound that made one's teeth ache.

At this ti, Wu Mo was surprised to find that the diamond knife, which was close to full marks in hardness, only left a shallow white mark on the surface of the light gray tal block!

This shocking scene made the middle-aged man, who was bored from waiting, open his mouth slightly.

"Hey, Little Brother, what kind of material are you using? It's so hard!"

As an early-stage six-star blacksmith, he naturally knew that the diamond knife in Wu Mo's hand was used to asure hardness. Therefore, he was very aware of the tal block's hardness. It was at least 85 points and above.

However, in reality, the only materials that could achieve such hardness were few alloys that could be nad.

However, the tal block in the young man's hand did not belong to any tal he knew, be it in shape or color. This imdiately aroused his curiosity.

The middle-aged man was curious, but Wu Mo did not answer him as if he did not hear him. The joy on his face gradually disappeared, and it was replaced by disappointnt.

"Although the hardness is good enough, there is still a problem with the weight. The fusion of the affinity tal and polyethylene is not sufficient. What's the problem?"

Wu Mo frowned as he pondered. When the middle-aged man behind him heard what he seed to be mumbling to himself, the man's pupils suddenly shrank.

After all, he was the team leader of the tal weapons production workshop, so he had a thorough understanding of various materials.

However, he had never heard of polyethylene, which was classified as plastic, being able to fuse with tal.

It was obvious that the young man in front of him was developing so kind of new tal. Otherwise, he would not be frowning when the hardness of the material was above 80.